Intel S875WP1 Product Guide - Page 58

Connecting Fans, Chassis Intrusion, Connecting Power Cables, Setting the BIOS Configuration Jumper

Get Intel S875WP1 - EATX MBD 875 P4 DDR-2CH SATA RAID VID GETH PDF manuals and user guides
UPC - 735858161381
View all Intel S875WP1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

Connecting Fans Connect the processor's fan heatsink cable to the processor fan header on the board. Connect the chassis fan cables to the board fan headers. See Figure 21 for fan header locations. Chassis Intrusion Connect the chassis intrusion cable from the chassis to the 1 x 2 header on the board. Connecting Power Cables CAUTION Failure to use an ATX12V power supply, or not connecting the 12 V processor core voltage power supply connector to the desktop board may +result in damage to the desktop board and/or power supply. Figure 21 shows the location of power connectors. 1. Observe the precautions in "Before You Begin" on page 39. 2. Connect the 12 V processor core voltage power supply cable to the 2x2 connector. 3. Connect the main power cable to the 2x10 connector. Setting the BIOS Configuration Jumper CAUTION Always turn off the power and unplug the power cord from the server before changing the jumper. Moving the jumper with the power on may result in unreliable server operation. J8J2 3 2 1 Figure 22. BIOS Configuration Jumper Block Location TP00196 58 Intel Server Board S875WP1-E Product Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
58
Intel Server Board S875WP1-E Product Guide
Connecting Fans
Connect the processor’s fan heatsink cable to the processor fan header on the board.
Connect the
chassis fan cables to the board fan headers. See Figure 21 for fan header locations.
Chassis Intrusion
Connect the chassis intrusion cable from the chassis to the 1 x 2 header on the board.
Connecting Power Cables
CAUTION
Failure to use an ATX12V power supply, or not connecting the 12 V
processor core voltage power supply connector to the desktop board may
+result in damage to the desktop board and/or power supply.
Figure 21 shows the location of power connectors.
1.
Observe the precautions in “Before You Begin” on page 39.
2.
Connect the 12 V processor core voltage power supply cable to the 2x2 connector.
3.
Connect the main power cable to the 2x10 connector.
Setting the BIOS Configuration Jumper
CAUTION
Always turn off the power and unplug the power cord from the server before
changing the jumper.
Moving the jumper with the power on may result in
unreliable server operation.
TP00196
3
1
2
J8J2
Figure 22. BIOS Configuration Jumper Block Location