Intel S875WP1 Product Guide - Page 87
Remote Access Configuration Submenu, Advanced
UPC - 735858161381
View all Intel S875WP1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Remote Access Configuration Submenu To access this menu, select Advanced on the menu bar, then Remote Access Configuration. Maintenance Main Advanced Security Power PCI Configuration Boot Configuration Peripheral Configuration Drive Configuration Floppy Configuration Event Log Configuration Video Configuration USB Configuration Chipset Configuration Fan Control Configuration Hardware Monitoring Remote Access Configuration Boot Exit The submenu represented by Table 32 is used to configure the remote access features. Table 32. Remote Access Configuration Submenu Feature Options Description Remote Access • Disabled (default) • Enabled Permits or denies the ability to remotely manage the system. Serial Port Number • COM1 (default) • COM2 This option is available only if Enabled is set for the Remote Access option. Specifies the serial port to use for console redirection. In addition to selecting the port number in BIOS setup, make sure the selected port is enabled for use. Serial Port Mode • 115200 8,n,1 • 57600 8,n,1 (default) • 19200 8,n,1 This option is available only if Enabled is set for the Remote Access option. Specifies the modem parameters for the selected Com port. Terminal Type • VT100 This option is available only if Enabled is set for the Remote Access option. Post Boot Support • Disabled (default) • Enabled This option is available only if Enabled is set for the Remote Access option. Specifies whether redirection should remain active after booting to DOS. When enabled, redirection remains active. When disabled, redirection is disabled upon booting to DOS. Configuration Software and Utilities 87