Intel S875WP1 Product Guide - Page 75
Table 22., Peripheral Configuration Submenu, Feature, Options, Description, Auto default - raid
UPC - 735858161381
View all Intel S875WP1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Table 22. Peripheral Configuration Submenu (continued) Feature Options Description Parallel Port • Disabled Configures the parallel port. • Enabled • Auto (default) Auto assigns LPT1 the address 378h and the interrupt IRQ7. An * (asterisk) displayed next to an address indicates a conflict with another device. Mode • Output Only • Bi-directional (default) Selects the mode for the parallel port. Not available if the parallel port is disabled. Output Only operates in AT-compatible mode. • EPP Bi-directional operates in PS/2-compatible mode. • ECP EPP is Extended Parallel Port mode, a high-speed bi-directional mode. ECP is Enhanced Capabilities Port mode, a high-speed bi-directional mode. Base I/O Address • 378 (default) • 278 This feature is present only when Parallel Port is set to Enabled Specifies the base I/O address for the parallel port. Interrupt • IRQ 5 • IRQ 7 (default) This feature is present only when Parallel Port is set to Enabled Specifies the interrupt for the parallel port. DMA • 1 • 3 (default) This feature is present only when Parallel Port Mode is set to ECP Specifies the DMA channel. 10/100 NIC • Disabled Enables or disables the on-board LAN#1 device. • Enabled (default) Gigabit NIC • Disabled Enables or disables the on-board LAN#2 device. • Enabled (default) ATI Rage XL Video • Disabled • Enabled (default) Enables or disables the on-board ATI* Rage XL video controller. Promise PDC20319 S150 TX4 • Disabled • Enabled (default) Enables or disables RAID support. Configuration Software and Utilities 75