Home » Intel Manuals » Motherboards » Intel SE7505VB2 » Manual Viewer

Intel SE7505VB2 Product Specification - Page 101

Other Product Mandatory Regulations to Consider due to new Emerging International Requirements

Add to My Manuals
Save this manual to your list of manuals

Page 101 highlights

Intel® Server Board SE7505VB2 Product Regulatory Compliance 13.1.4 Other Product Mandatory Regulations to Consider due to new Emerging International Requirements Note: The use of telecommunication devices such as modems and/or wireless devices, have not been planned for with respect to these systems and/or board products. If there is any change of plan to use such devices, then telecommunication type certifications will require additional planning. If NEBS compliance is required for system level products, additional certification planning and design will be required. 13.1.5 Important Product Regulation Requirements All plastics used must be made of a UL recognized material, and have the appropriate flame ratings mandated by IEC60 950 All plastics parts shall be manufactured by an UL approved fabricator and the parts shall be marked with the appropriate UL traceability markings. All plastic parts shall have not use brominated flame retardants or any other halogenated retardants that are not accepted by environmental programs such as Blue Angels, Nordic White Swan, Swedish TCO. All plastic parts shall be marked with the ISO11469 requirements for recycling. All wiring harnesses shall be sourced from a UL approved wiring harness manufacturer. All Fans shall have the minimum certifications: UL and TUV or VDE All external power connectors shall have current limiting devices that have UL and TUV or VDE certifications and shall be suitable rated for the application where the device in its application complies with IEC60 950. All lithium batteries shall be UL recognized and have suitable reverse bias current protection for the application it is used in. All printed wiring boards shall be rated UL94V-0 and be sourced from a UL approved printed wiring board manufacturer All connectors shall be UL recognized and have a UL flame rating of UL94V-0 Product safety label must be printed on UL approved label stock and printer ribbon. Alternatively labels can be purchased from a UL approved label manufacturer. 13.1.6 Product Regulatory Compliance Markings This product is provided with the following Product Certification Markings. cURus Recognition Mark CE Mark Russian GOST Mark Australian C-Tick Mark Korean RRL MIC Mark Taiwan BSMI DOC Marking & BSMI EMC Warning ICES-003 Marking Revision 1.2 101 Intel part number C32194-002

Section	Page
Introduction	13
SE7505VB2 Server Board Overview	14
Intel® Server Board SE7505VB2 Feature Set	14
Functional Architecture	16
Processor and Memory Subsystem	16
Processor Support	16
Processor VRD	17
Reset Configuration Logic	17
Processor Module Presence Detection	17
Interrupts and APIC	17
Memory Subsystem	17
Memory DIMM Support	18
Memory Configuration	19
Memory Cooling	19
I2C Bus	21
DRAM ECC	21
The Intel® E7505 Chipset	21
MCH Memory Architecture Overview	22
DDR Configurations	23
Memory Controller Hub (MCH)	23
AGP 8X Bus	24
P64H2	24
PCI Bus P64-B I/O Subsystem	24
PCI Bus P64-C I/O Subsystem	24
ICH4	24
PCI Bus P32-A I/O Subsystem	25
PCI Bus Master IDE Interface	25
USB Interface	25
Compatibility Interrupt Control	26
APIC	26
General Purpose Input and Output Pins	26
Power Management	28
Super I/O	28
GPIOs	29
Serial Ports	29
Serial A	29
Serial B	29
Floppy Disk Controller	30
Keyboard and Mouse	30
Wake-up Control	30
BIOS Flash	30
Clock Generation and Distribution	31
PCI I/O Subsystem	33
PCI Subsystem	33
P32-A: 32-bit/33-MHz PCI Subsystem	33
Device IDs (IDSEL)	33
P32-A Arbitration	34
P64-B and P64-C: 64-bit/100- or 66-MHz PCI Subsystem	34
Device IDs (IDSEL)	34
P64-B Arbitration	35
P64-C Arbitration	35
Serial ATA Controller	35
Video Controller	36
Video Modes	37
Video Memory Interface	37
Host Bus Interface	38
Network Interface Controller (NIC)	39
NIC Connector and Status LEDs	39
Interrupt Routing	40
Legacy Interrupt Routing	40
APIC Interrupt Routing	40
Legacy Interrupt Sources	41
Serialized IRQ Support	41
IRQ Scan for PCIIRQ	41
PCI Error Handling	41
Hardware Monitoring	45
Monitored Components	45
Fan Speed Control	46
Chassis Intrusion	46
SE7505VB2 ACPI Implementation	48
ACPI	48
Front Panel Switches	48
Wake up Sources (ACPI and Legacy)	49
SE7505VB2 Connectors	50
Main Power Connector	50
Memory Module Connector	51
Processor Socket	52
I2C Header	55
PCI Slot Connector	55
AGP 3.0 Pro50 Connector	58
Front Panel Connector	59
VGA Connector	59
NIC Connector	60
IDE Connector	60
SATA Connector	61
USB Connector	62
Floppy Connector	63
Serial Port Connector	63
Keyboard and Mouse Connector	64
Miscellaneous Headers	64
Fan Header	64
Intrusion Cable Connector	65
Configuration Jumpers	66
System Recovery and Update Jumpers	66
BIOS	67
Using the BIOS Setup Utility	67
If You Cannot Access Setup	67
Starting Setup	67
Setup Menus	67
Menu Selection Bar	69
Main Menu	70
Primary/Secondary, Master/Slave Submenus	71
Advanced Menu	72
I/O Device Configuration Submenu	73
On Board Device Submenu	76
PCI Configuration Submenu	77
Server Menu Submenu	78
Console Redirection Submenu	79
Event Logging Submenu	81
Hardware Monitor Submenu	82
Security Menu	83
Power Menu	84
Boot Menu	85
System Menu	86
Exit Menu	87
Upgrading the BIOS	88
Preparing for the Upgrade	88
Recording the Current BIOS Settings	88
Obtaining the Upgrade Utility	88
Creating a Bootable Diskette	89
Creating the BIOS Upgrade Diskette	89
Upgrading the BIOS	89
Crisis Recovery Diskette	90
Creating the Crisis Recovery Diskette	91
Manually Recovering the BIOS	92
Error Handling and Reporting	93
POST Error Beep Codes	93
BIOS Event Log	93
Absolute Maximum Ratings	94
Mean Time Between Failures (MTBF) Test Results	94
Power Information	95
SE7505VB2 Server Board Power Budget	95
Power Supply Specifications	96
Power Timing	96
Voltage Recovery Timing Specifications	99
Product Regulatory Compliance	100
	100
Product Safety Compliance	100
Product EMC Compliance	100
Mandatory / Standard: Certifications; Registration; Declarations	100
Other Product Mandatory Regulations to Consider due to new Emerging International Requirements	101
Important Product Regulation Requirements	101
Product Regulatory Compliance Markings	101
Electromagnetic Compatibility Notices	102
Europe (CE Declaration of Conformity)	102
Australian Communications Authority (ACA) (C-Tick Declaration of Conformity)	102
Ministry of Economic Development (New Zealand) Declaration of Conformity	102
BSMI (Taiwan)	102
Replacing the Back up Battery	102

Match case Limit results 1 per page

Intel® Server Board SE7505VB2

Product Regulatory Compliance

13.1.4

Other Product Mandatory Regulations to Consider due to new Emerging

International Requirements

Note:

The use of telecommunication devices such as modems and/or wireless devices, have

not been planned for with respect to these systems and/or board products. If there is any

change of plan to use such devices, then telecommunication type certifications will require

additional planning. If NEBS compliance is required for system level products, additional

certification planning and design will be required.

13.1.5

Important Product Regulation Requirements

All plastics used must be made of a UL recognized material, and have the appropriate

flame ratings mandated by IEC60 950

All plastics parts shall be manufactured by an UL approved fabricator and the parts shall

be marked with the appropriate UL traceability markings.

All plastic parts shall have not use brominated flame retardants or any other halogenated

retardants that are not accepted by environmental programs such as Blue Angels,

Nordic White Swan, Swedish TCO.

All plastic parts shall be marked with the ISO11469 requirements for recycling.

All wiring harnesses shall be sourced from a UL approved wiring harness manufacturer.

All Fans shall have the minimum certifications: UL and TUV or VDE

All external power connectors shall have current limiting devices that have UL and TUV

or VDE certifications and shall be suitable rated for the application where the device in

its application complies with IEC60 950.

All lithium batteries shall be UL recognized and have suitable reverse bias current

protection for the application it is used in.

All printed wiring boards shall be rated UL94V-0 and be sourced from a UL approved

printed wiring board manufacturer

All connectors shall be UL recognized and have a UL flame rating of UL94V-0

Product safety label must be printed on UL approved label stock and printer ribbon.

Alternatively labels can be purchased from a UL approved label manufacturer.

13.1.6

Product Regulatory Compliance Markings

This product is provided with the following Product Certification Markings.

cURus Recognition Mark

CE Mark

Russian GOST Mark

Australian C-Tick Mark

Korean RRL MIC Mark

Taiwan BSMI DOC Marking & BSMI EMC Warning

ICES-003 Marking

Revision 1.2

Intel part number C32194-002

101