Intel SE7505VB2 Product Specification - Page 92

Manually Recovering the BIOS, Intel® Server Board SE7505VB2, BIOS Recovery Jumper

Get Intel SE7505VB2 PDF manuals and user guides View all Intel SE7505VB2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 92 highlights

BIOS Intel® Server Board SE7505VB2 10.2.3.2 Manually Recovering the BIOS A BIOS recovery can also be manually initiated. This option would be used only when the BIOS is corrupt, but the ROM checksum error does not occur during POST. To manually initiate a BIOS recovery, use the following steps: 1. Power down and unplug the system from the AC power source. 2. Move the recovery jumper at J4J1 from the storage position at pins 9 and 10 to cover pins 3 and 4. See the figure below. Figure 11. BIOS Recovery Jumper 3. Insert the Crisis Recovery Diskette into the A: diskette drive. 4. Plug the system into the AC power source and power it on. 5. A blue screen will be displayed and the recovery process will automatically run. The system will continue to beep throughout the recovery process. The recovery process is complete when the beeping stops. 6. Remove the diskette. 7. Power down and unplug the system from the AC power source. 8. Move the BIOS recovery jumper at J4J1 back to the original position, covering storage pins 9 and 10. 9. Plug the system into the AC power source and power it up to confirm that the recovery was successful. 92 Revision 1.2 Intel part number C32194-002

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
BIOS
Intel® Server Board SE7505VB2
10.2.3.2
Manually Recovering the BIOS
A BIOS recovery can also be manually initiated.
This option would be used only when the BIOS
is corrupt, but the ROM checksum error does not occur during POST.
To manually initiate a
BIOS recovery, use the following steps:
1.
Power down and unplug the system from the AC power source.
2.
Move the recovery jumper at J4J1 from the storage position at pins 9 and 10 to cover
pins 3 and 4.
See the figure below.
Figure 11. BIOS Recovery Jumper
3.
Insert the Crisis Recovery Diskette into the A: diskette drive.
4.
Plug the system into the AC power source and power it on.
5.
A blue screen will be displayed and the recovery process will automatically run.
The
system will continue to beep throughout the recovery process.
The recovery process is
complete when the beeping stops.
6. Remove the diskette.
7.
Power down and unplug the system from the AC power source.
8.
Move the BIOS recovery jumper at J4J1 back to the original position, covering storage
pins 9 and 10.
9.
Plug the system into the AC power source and power it up to confirm that the recovery
was successful.
Revision 1.2
Intel part number C32194-002
92