Intel SE7505VB2 Product Specification - Page 75

Intel® Server Board SE7505VB2, Revision 1.2, Intel part number C32194-002

Page 75 highlights

Intel® Server Board SE7505VB2 BIOS Depending on the Mode is selected above, the parallel port configuration options are different: Output only option selected Base I/O address Interrupt • 378 (default) • 278 • 3BC • IRQ 5 • IRQ 7 (default) Set the base I/O address for parallel port. Set the interrupt for parallel port Bi-directional option selected Base I/O address Interrupt • 378 (default) • 278 • 3BC • IRQ 5 • IRQ 7 (default) Set the base I/O address for the parallel port Set the interrupt for parallel port EPP option selected Interrupt • IRQ 5 • IRQ 7 (default) Set the interrupt for parallel port Note: The "Base I/O address" cannot be changed. Its default value is set to [378] ECP option selected Base I/O address Interrupt DMA Channel • 378 (default) • 278 • 3BC • IRQ 5 • IRQ 7 (default) • DMA 1 • DMA 3 (default) Set the base I/O address for parallel port. Set the interrupt for parallel port Set the DMA Channel for parallel port Feature Floppy disk controller Choices • Disabled • Enabled (default) Description Configure using these options [Disabled] No Configuration [Enabled] User Configuration Revision 1.2 75 Intel part number C32194-002

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108

Intel® Server Board SE7505VB2
BIOS
Depending on the
Mode
is selected above, the parallel port configuration options are different:
Output only option selected
Base I/O address
Set the base I/O address for parallel port.
Interrupt
Set the interrupt for parallel port
378 (default)
278
3BC
IRQ 5
IRQ 7 (default)
Bi-directional option selected
Base I/O address
Set the base I/O address for the parallel port
Interrupt
Set the interrupt for parallel port
378 (default)
278
3BC
IRQ 5
IRQ 7 (default)
EPP option selected
Interrupt
Set the interrupt for parallel port
IRQ 5
IRQ 7 (default)
Note
: The “Base I/O address” cannot be changed. Its default value is set to [378]
ECP option selected
Base I/O address
Set the base I/O address for parallel port.
Interrupt
DMA Channel
Set the DMA Channel for parallel port
378 (default)
278
3BC
IRQ 5
IRQ 7 (default)
Set the interrupt for parallel port
DMA 1
DMA 3 (default)
Feature
Choices
Description
Floppy disk controller
Configure using these options
[Disabled] No Configuration
[Enabled] User Configuration
Disabled
Enabled
(default)
Revision 1.2
Intel part number C32194-002
75