JVC DLA-QX1G Instruction Manual - Page 11

Controls and Features (cont.) Left-hand side / Back Side ENGLISH pq we 9, w Intake area (filter) Air is taken in through this area to cool the light-source lamp. If this area is blocked or if something that obstructs taking-in or exhausted air is placed around the projector, heat may build up inside and could cause a fire. For details, refer to "Precautions for Installation" on pages 17 and 18. CAUTIONS • Be careful as paper, cloth or soft cushion could be drawn in if placed nearby. Do not block the intake area, or heat may build up and could cause a fire. • Clean the filter periodically. Deposition of dirt on the filter works to reduce the cooling effect, causing heat to build up inside, which could cause a fire or malfunction. For details, refer to "Cleaning and Replacing the Filters" on pages 48 and 49. e Exhaust vent (for the light-source lamp power supply) This vent dischrages warm air from the cooling fan for the light-source lamp power supply. This fan continues running as long as the MAIN POWER switch is on. p, q Exhaust vents Vents for cooling fans through which warm air comes out. To remove the handles Remove two screws fixing the handle to the projector with a hex wrench. • Keep the handles and screws for future use. STAND BY OPERATE VIC SELECT 1 2 MODE KEY STONE 3 EXIT MENU T ZOOM FOCUS W ENTER Then, attach the supplied protective caps to cover the screw holes. STAND BY OPERATE VIC SELECT 1 2 MODE KEY STONE 3 EXIT MENU T ZOOM FOCUS W ENTER 9