JVC DLA-QX1G Instruction Manual - Page 65
Control command table
View all JVC DLA-QX1G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Specifications (Cont.) 2-3. Parameters used for the data format The following three kinds of parameters are prepared for the control command and response data. (1) Numeric value Designates the 2-byte hexadecimal value with the sign as the 4-digit (byte) characters. Designation allowable range : "8000" to "7FFF" (2) ON/OFF Designates the status (ON/OFF) of the projector, such as POWER and HIDE. Character "0" "1" Hex. 30 31 Meaning OFF ON (3) Special parameters Input switching parameters: Character "1" "2" "3" Hex. 30 31 33 Meaning VIC1 VIC2 VIC3 Operation mode parameters: Character Hex. "0000" 30h 30h 30h 30h "0001" 30h 30h 30h 31h "0002" 30h 30h 30h 32h "0004" 30h 30h 30h 34h Meaning Stand-by mode Power-on mode Cool-down mode Warning mode 3. Control command table The control commands that can be sent from the computer are as follows: Function Command OPERATE U0F HIDE U00 Right Left rev. U17 Keystone U40 Input U1A Operation mode Z03 Asking Power ON ELSE - - - - - - Kind of data Numeric Value ON/OFF Special Data - - - - - - - - - - VIC1, VIC2, VIC3 - - Stand-by, Power-on, Cool-down, Warning * Keystone: Numeric value can range from "FF80" to "0080" * Operation mode: Only Asking command is possible ENGLISH 63