JVC DLA-QX1G Instruction Manual - Page 40
Basic Operations Cont., Setting the amount of lens shifting, SHIFT
View all JVC DLA-QX1G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Basic Operations (Cont.) I Remote control unit OPERATE HIDE BACK LIGHT ENTER LOCK UNLOCK SHIFT +/- buttons EXIT MENU VIC 1 VIC 2 VIC 3 T ZOOM W SHIFT FOCUS ON KEYSTONE SHUTTER OFF T DIGITAL ZOOM W RM-MQX1G REMOTE CONTROL UNIT I Setting the amount of lens shifting (SHIFT) When the lens unit (not supplied) has the lens shifting function, the projected screen can be moved vertically in position. • When using the projectors in stack configuration (stacked one over another), make adjustment so that the picture of each projector overlays exactly using the lens shift function. Press the SHIFT + button: The lens shifts upward. Press the SHIFT - button: The lens shifts downward. Remote control unit SHIFT STAND BY OPERATE HIDE VIC SELECT 1 KEY STONE 2 3 EXIT MENU T ZOOM FOCUS ENTER W CCOONNTTRROOLL RREEMMOOTTEE RS-232C OUT RS-232C IN RGB Analog VIC R G B Y H/CS Notes • The amount of shifting is within the range of approx. -50% to 50%. • When the lens shift is set to 0%, the center of the projection screen is the same height as the center of the lens. When the lens shift is set to 50%, the bottom edge of the projection screen is at the same height as the center of the lens. When the lens shift is set to -50%, the upper edge of the projection screen is at the same height as the center of the lens. 38