JVC DLA-QX1G Instruction Manual - Page 55

Warning Messages The following shows the warning messages displayed on the screen. When a warning message is displayed, take the corrective action described here. Message Cause Corrective action SLOT1 RGB No Input • No device is connected to the input terminal. • The terminal is connected but no signal comes in from the connected device. • Connect a device to the selected terminal. • Operate the connected device and output a signal. * The selected slot number and VIC name are shown in the first line of the massage. SLOT1 RGB Frequency of image signal is out of range. • The frequency of the input video signal is out of range. * The selected slot number and VIC name are shown in the first line of the massage. • Input the video signals whose frequency is within the projector's specified range. SLOT1 RGB No image signal is shown for this type. Lamp replacement EXIT Warning Lamp replacement EXIT The word "Warning" blinks. • Though the frequency of the input video signal is within the acceptable range, other items such as resolution are out of the projector's specified range. • Input the video signals within the projector's specified range. * The selected slot number and VIC name are shown in the first line of the massage. • The accumulated lamp use time reaches 900 hours. * Every time the projector is turned on, this message appears on the screen. • Consult your dealer to arrange for a new light-source lamp and replace the light-source lamp a little earlier. * Press the EXIT button to clear the massage. (This display can be also cleared with the MENU button.) • The accumulated lamp use time reaches 1000 hours. • Consult your dealer to replace the light-source lamp. * The message can be cleared by pressing the EXIT button. However, the same message will appear every one hour. * Once the projector is turned off, the projector does not turn on unless the light-source lamp is replaced with new one. ENGLISH 53