JVC DLA-QX1G Instruction Manual - Page 47

Menu Operations (Cont.) Contents of the Menu (Cont.) The values in the [ ] are initial settings. I VIC menu (VIC menu 1/2) In this menu, the setting of the installed VIC can be adjusted. When RGB VIC is selected as the current input terminal, "VIC menu" is available. When HDTV/HD-SDI VIC is selected as the current input terminal, "VIC menu1" and "VIC menu 2" are available. For RGB VIC VIC menu Tracking Phase AD sync adj. 123 Offset & Gain Clamp 1020 12 3 ENTER ST BP Tracking : Adjusts the lateral size and display area of video image within the range of 0 to 4095. Phase : Adjusts flickering or dim video image within the range of 0 to 15. AD sync adj. : Adjusts the outline of the text on the screen or reduces the noise. To get the best picture, select a value from the range of 0 to 255. [0] Offset & Gain : Adjusts the offset and gain of the input signal for each RGB. Press the ENTER button to go to the next sub menu. See "Offset & Gain menu" on page 47. Clamp : Sets the clamp pulse's position at the back porch (BP) or on the sync tip (ST). Normally, the clamp pulse is used at ST. If, with some PCs or workstations, the screen becomes unstable such as being too dark or too bright, try to switch to BP. [ST] For HDTV/HD-SDI VIC VIC menu 1 Tint 123 Color 123 Sharpness 123 Phase VIC menu 2 3 123 ENTER VIC menu 2 HDTV MAIP 2-2/2-3 Pulldown VIC menu 1 1080i 1035i OFF ON OFF Auto ENTER • To alternate between the VIC menu 1 and the VIC menu 2, press the ENTER button while the other menu is selected. Tint : Adjusts the tint of the video image being projected within the range of -30 to 30. Normally select 0. [0] Color Sharpness Phase HDTV : Adjusts the color density of the video image being projected within the range of -30 to 30. Normally select 0. [0] : Adjusts the sharpness of the video image being projected within the range of -15 to 15. Normally select 0. [0] : Adjusts flickering or dim video image within the range of 0 to 15. : Selects proper format to project the video image of the HD signal with accurate 16:9 aspect ratio. [1080i] 1080i : Normally select this. 1035i : Select this when the video image is not stable. MAIP : Detects the degree of moving in the video image and gets the best performance to project the moving pictures. [ON] ON : For the video image with a lot of moving pictures. OFF : For the video image with a lot of still pictures. 2-2/2-3 Pulldown : Automatically adjusts the video image from the film with quick action to be projected properly. [AUTO] OFF : Not to use this function. AUTO : Normally select this. ENGLISH (To be continued on the next page) 45