Kenmore HE2t User Guide - Page 55
Removing The Drain Pump - water pump
View all Kenmore HE2t manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
REMOVING THE DRAIN PUMP 5. Loosen the clamp and remove the pumpto-tub hose from the drain pump. 6. Loosen the clamp and remove the pumpto-drain hose from the drain pump. Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels before operating. Failure to do so can result in death or electrical shock. REASSEMBLY NOTE: When you reconnect the hoses, align their tab(s) with the marks on the drain pump. Pump-To-Tub Hose Tab Arrow Tabs Pump-ToDrain Hose 1. Unplug washer or disconnect power. 2. Turn off the water supply to the washer. 3. Remove the lower front access panel (see step 10 on page 4-11 for the procedure). 7. Using a flat-blade screwdriver, lift the rubber pad, and slide the pump to the left and unhook the bottom tab, then lift the pump out of the chassis floor slots. Drain Pump 4. Using a shallow pan to catch the water, unscrew the filter from the drain pump, and drain the water from the pump. Drain Pump Filter 4-17 Lift Rubber Pad Tab Continued on the next page.