Kenmore HE2t User Guide - Page 66
Removing The Tub & Basket And Baffle - weight removal
View all Kenmore HE2t manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
REMOVING THE TUB & BASKET AND BAFFLE 7. Remove the eight hex-head screws from the front frame and remove the frame. Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels before operating. Failure to do so can result in death or electrical shock. 1. Unplug washer or disconnect power. 2. Turn off the water supply to the washer. 3. Pull the washer away from the wall. 4. Remove the detergent dispenser assem- bly (see pages 4-10 through 4-12 for the procedure). 5. Loosen the clamp and remove the main water feed tube from the detergent dispenser. 6. Pull the free end of the main water feed tube from the tub opening. REASSEMBLY NOTE: When you reconnect the water feed tube, align the arrow on the tube with the line on the detergent dispenser. Tube To Dispenser Line Arrow Water Feed Tube Tube To Tub Front Frame Screws 8. Remove the 1/2˝ bolts (3 each) from the front top and bottom tub weights, and remove the weights from the tub. Top Front Weight Bottom Front Weight 9. Rotate the support out of the way, and remove the three 1/2˝ bolts from the top rear weight, then remove the weight from the washer. Support Bracket Top Rear Weight 4-28