Kenmore HE2t User Guide - Page 90
Won't Drain, Machine, Vibrates, Incorrect, Water, Temperature, Display, Flashing - washer drain pump
View all Kenmore HE2t manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
PROBLEM WON'T DRAIN POSSIBLE CAUSE/TEST NOTE: Possible Cause/Tests must be performed in the sequence shown for each problem. 1. Unplug washer or disconnect power. 2. Check wire harness connections. 3. Check drain pump. 4. Check drain pump motor. 5. Check that the drain hose and drain pump filter are clear of foreign objects. 6. Plug in washer or reconnect power. 7. Verify CCU operation by running a Diagnostic Test or any cycle. MACHINE VIBRATES 1. Remove shipping system. 2. Check installation. 3. Check leveling feet. INCORRECT WATER TEMPERATURE 1. Check that the inlet hoses are connected properly. 2. Unplug washer or disconnect power. 3. Check the water heater and wire harness connections to it. 4. Check water temperature sensor for an abnormal condition. See the Water Temperature Sensor section . 5. Plug in washer or reconnect power. 6. Verify CCU operation by running a Diagnostic Test or any cycle. DISPLAY FLASHING See Failure/Error Display Codes. 6-12