Konica Minolta bizhub 181 bizhub 181 Twain Driver User Manual - Page 13
Procedures for making connections and installing the driver, Reminder - user guide
View all Konica Minolta bizhub 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installing the TWAIN driver 2 Connecting to the network In order to perform TWAIN scanning on a network, the optional network interface card NC-503 or image controller IC-206 must be installed. For details on connecting this machine to the network, refer to "Installing the TWAIN driver by using the installer" on page 2-12. For details on the network interface card NC-503 and image controller IC-206, refer to the corresponding User's Guide. Procedures for making connections and installing the driver The TWAIN driver can be installed by using Plug and Play or by using the installer. The installation procedure differs depending on the method used to make the connection. Use the installation method that corresponds with the connection method. 2 Reminder If the machine is to be connected to a USB port, install the driver by using Plug and Play. If the machine is to be connected to a network, install the driver by using the installer. Connection method USB port connection Supported operating sys- TWAIN driver installation method tems Windows XP, Windows Server 2003, Windows Vista, Windows 2000 and Windows Me Install using Plug and Play. For details, refer to "Installing the TWAIN driver by using Plug and Play" on page 2-5. TWAIN Driver 2-2