Konica Minolta bizhub C650 bizhub C650 User Guide Enlarge Display Operations - Page 46
Selecting Finishing settings, The Auto Paper setting is not selected when the Mixed Original
View all Konica Minolta bizhub C650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Using copy functions Chapter 2 Using copy functions 2 2.7 Selecting Finishing settings Various settings can be selected for sorting and finishing copies fed into the output tray. The following Finishing settings are available. Setting Collate (By Set) Group Offset*1 Staple*2*3 Punch*4*5 Half-Fold*6 Center Staple & Fold*6 Tri-Fold*6 Z-Fold*7 Description Select this setting to separate each set of a multi-page document. Select this setting to separate the copies of each page in a multipage document. Select this setting to feed out and sort printed copies in an alternating crisscross pattern if the sorting conditions are met when no finisher is installed. Select this setting to feed out and stack the printed copies on top of each other with each set shifted to separate it when a finisher is installed. Select one of these settings to bind the printed copies with staples. "Corner" or "2 Position" can be selected. Select one of these settings to punch holes in the copies for filing them. Select this setting to fold copies in half before feeding them out. Select this setting to staple copies at two places along the center, then fold the copies in half before feeding them out. Select this setting to fold copies in three before feeding them out. Select this setting to fold copies in half along the center, and additionally mountain-fold one of the halves before feeding them out. *1 If no finisher is installed and all of the following conditions are met, printed copies can be fed out and sorted in an alternating crisscross pattern. - 8-1/2 × 11 or 5-1/2 × 8-1/2-size (A4- or B5-size) paper is used. - Paper of the same size and type is loaded with the w orientation in one paper tray and with the v orientation in another tray. - The "Auto" Paper setting is selected. - The "Auto" Paper setting is not selected when the "Mixed Original" setting is selected. *2 If a Staple setting is selected, the "Collate (By Set)" setting is automatically selected. The "Offset" setting cannot be selected at the same time that a Staple setting is selected. *3 The Staple settings are available only if the optional finisher is installed. C650 2-17