Konica Minolta bizhub C650 bizhub C650 User Guide Enlarge Display Operations - Page 65
Selecting a Paper Size setting
View all Konica Minolta bizhub C650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Using copy functions Chapter 2 2 Using copy functions Selecting a Paper Size setting The paper size can be specified for the tray 1, tray 2 and bypass tray. 2 Note For details on loading paper, refer to the User's Guide [Copy Operations]. The paper size can be selected for the bypass tray in any of the following ways. Setting Auto Detect*1 Metric Sizes*2 Inch Sizes*2 Other*2 Custom Size*3 Wide Paper*1*4 Description Select this setting to automatically detect the size of the paper loaded into the bypass tray. A metric paper size can be set so that the paper tray is used specifically with the selected paper size. A paper size in inches can be set so that the paper tray is used specifically with the selected paper size. A paper size other than the preset metric and inch sizes can be set so that the paper tray is used specifically with the selected paper size. A custom paper size can be set so that the paper tray is used specifically with the selected paper size. A wide paper size can be set so that the paper tray is used specifically with the selected paper size. *1 Settings can be specified for trays 1 and 2. In addition, [12-1/4×18 w] is available. *2 If paper other than the specified paper size is loaded, a paper misfeed may occur since the paper size is not automatically detected. *3 In order to specify a custom paper size in Enlarge Display mode, the custom paper size must first be stored before entering Enlarge Display mode. For details, refer to the User's Guide [Copy Operations]. *4 By specifying paper one size larger than the document as wide paper, the document can be copied at the center so that there is no loss of the document image. The following procedure describes how to specify the size of the paper loaded into the bypass tray. 2-36 C650