Konica Minolta bizhub PRESS C71hc SD-513 User Manual - Page 146
Center Position of Front 2 Positions of 4 Position Staple
View all Konica Minolta bizhub PRESS C71hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
5.2 [Saddle Stitcher Adjustment] - [Staple Center Adjustment] 5 7 Exit the print mode to return to the Staple Center Position Adjustment Screen. % In bizhub PRESS 1250/1250P/1052, press [Close]. % In bizhub PRESS C1070/C1070P/C1060/C71hc or bizhub PRESS C1100/C1085, press [Exit PrintMode]. 8 If adjustment is required, use the touch panel keypad or control panel keypad to enter the setting data. % Adjustable range: -20 (To move rearward) to +20 (To move frontward) (1 step = 0.1 mm) % Use [+-] to specify the value to be positive or negative. 9 Press [Set] to change the current data. 10 Repeat the steps from 3 to 9 until the desired result is obtained. 11 Press [Return] to restore the Staple Center Position Adjustment Menu Screen. 5.2.2 Center Position of Front 2 Positions of 4 Position Staple Adjust the center position of the front 2 positions of 4 position staples determined by Saddle Stitcher SD-513. Objects of adjustment: Full Area (Offset for All Size), B4 w, 8K w, 11 e 17 w, A3 w, A3W w, B4W w, 11 e 17W w, Custom NOTICE With [Full Area] ([Offset for All Size]) selected, the entered value will be applied to all sizes. With a specific paper size selected, set value will be the sum of the entered value and the value previously specified for [Full Area] ([Offset for All Size]). NOTICE Make this adjustment after [Half-Fold Position Adjustment] (page 5-32) has been completed. 1 Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen. Saddle Stitcher SD-513 5-17