Konica Minolta bizhub PRESS C71hc SD-513 User Manual - Page 98
Forming Spine Corners on Fold & Stapled Sets, bizhub PRESS 1250/1250P/1052, Trimmer Unit TU-503
View all Konica Minolta bizhub PRESS C71hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
4.11 Forming Spine Corners on Fold & Stapled Sets 4 4.11.2 Settings on the Copy Screen 1 Position the original. % The number of original sheets will be the number of pages for fold & stapled output, thus determining the number of fold & stapled sheets. For information on the number of fold & stapled sheets, see page 2-13. 2 Load cover for fold & staple in the desired tray. % Load cover paper into [Tray1] to [Tray11]. The [PI-PFU Tray] or [PI Tray] is not available for covers. % In bizhub PRESS 1250/1250P/1052, use [Paper Presetting] to change the paper setting for paper loaded temporarily onto a tray. See the User's Guide supplied with this machine for details on [Paper Presetting]. 3 Press [COPY] tab to display the Copy Screen. 4 Press [Output Setting]. The Output Setting Screen will be displayed. 5 Select [Fold&Staple]. The Fold & Staple Setting Screen will be displayed. 6 For "Staple", select [2 Positions] or [4 Positions]. 7 For "(1) Fore-edge Trimming", select [ON] or [OFF]. % If the saddle stitcher is equipped with Trimmer Unit TU-503, [(2)2-Side Slitting] is available on the Fold & Staple Setting Screen. See page 4-48 for details. Saddle Stitcher SD-513 4-61