Konica Minolta bizhub PRESS C71hc SD-513 User Manual - Page 172
Press [Return] to restore the Crease Position Adjustment Menu Screen.
View all Konica Minolta bizhub PRESS C71hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
5.12 [Saddle Stitcher Adjustment] - [Crease Position Adjustment] 5 3 Select the size to be adjusted using [+] or [,] to scroll. 4 Press [Print Mode]. 5 Load the paper size selected in step 3 into the tray, then select that tray key. 6 Press Start on the control panel. A sample pattern will be output. 7 Check the misalignment (a) between the fold and crease of the output sheet. Allowance: a = within ^ 1 mm [1] Fold [2] Edge of crease 8 Exit the print mode to return to the Half-Fold Crease Position Adjustment Screen. % In bizhub PRESS 1250/1250P/1052, press [Close]. % In bizhub PRESS C1070/C1070P/C1060/C71hc or bizhub PRESS C1100/C1085, press [Exit PrintMode]. 9 If adjustment is required, use the touch panel keypad or control panel keypad to enter the setting data. % Adjustable range: -20 (To shorten) to +20 (To lengthen) (1 step = 0.1 mm) % Use [+-] to specify the value to be positive or negative. % Adjust the distance between the cover edge of the output top face and the crease. 10 Press [Set] to change the current data. 11 Repeat the steps from 4 to 10 until the desired result is obtained. 12 Press [Return] to restore the Crease Position Adjustment Menu Screen. Saddle Stitcher SD-513 5-43