Konica Minolta bizhub PRESS C71hc SD-513 User Manual - Page 7
Intended Use of this Machine
View all Konica Minolta bizhub PRESS C71hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
1 Intended Use of this Machine 1.1 1 Introduction 1.1 Intended Use of this Machine Intended Use Saddle Stitcher SD-513 (this machine) is an optional saddle stitcher for the digital printing system. With this machine installed, you can use the half-fold and fold & staple functions and combine the half-fold/fold & staple function and the fore-edge trimming function. Also, if this machine is equipped with optional devices, you can add fold lines (creases) and perform 2-side slitting or spine corner forming for cover paper. This machine supports the following digital printing systems. - bizhub PRESS 1250/1052 - bizhub PRESS 1250P - bizhub PRESS C1070/C1060 - bizhub PRESS C1070P/C71hc - bizhub PRESS C1100/C1085 To use this machine, comply with the following items. - Use this machine in the range of the specifications for the main body and optional devices. - Comply with all the precautions for safety information described in the user's guide. - Comply with the prohibited items for copying or printing. (For details, refer to "Safety Information" in the booklet manual supplied with the digital printing system.) - Faithfully observe inspection and maintenance instructions. - Strictly observe the national and corporate safety regulations and general safety standards. Unacceptable operation conditions This machine may not run when: - an error or damage has been detected; - the maintenance interval has expired; and - mechanical functions or electrical functions do not run normally. Disclaimers We assume no responsibility for damages that is caused when this machine is operated under unacceptable conditions. 1-2 Saddle Stitcher SD-513