Konica Minolta bizhub C35 bizhub C35 Facsimile User Guide - Page 38

[Fax Function Settings], Auto], Description - specifications

Page 38 highlights

Item [Tray Selection for RX Print] [Min. Reduction for RX Print] [Print Separate Fax Pages] [Duplex Print (RX)] Description Settings [Auto] / [Tray 1] / [Tray 2] / [Tray 3] / [Tray 4] Select the paper drawer to be used when a specific paper drawer is used for printing received documents. " [Tray 3] and [Tray 4] do not appear if the optional lower feeder units have not been installed. Settings [87%] - [96%] / [100%] Specify the reduction ratio (%) used for printing received documents. Settings [ON] / [OFF] Select whether or not pages are split when the received document is longer than the standard paper size. When [Duplex Print (RX)] is set to [ON], this parameter does not appear. Settings [ON] / [OFF] Select whether or not received documents are printed on both sides of paper. When [Print Separate Fax Pages] is set to [ON], this parameter does not appear. [Fax Function Settings] Item Description [F-Code TX] Settings [ON] / [OFF] Select whether or not F-code transmissions are used. [Dest. Check Display Settings [ON] / [OFF] Func.] Select whether or not the list of specified destinations is printed before the fax is sent. [Fax Settings] (Admin Settings) 2-13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140

[Fax Settings] (Admin Settings)
2-13
[Fax Function Settings]
[Tray Selection for
RX Print]
Settings
[Auto]
/ [Tray 1] / [Tray 2] / [Tray 3] /
[Tray 4]
Select the paper drawer to be used when a specific
paper drawer is used for printing received docu-
ments.
[Tray 3] and [Tray 4] do not appear if the
optional lower feeder units have not been
installed.
[Min. Reduction for
RX Print]
Settings
[87%] -
[96%]
/ [100%]
Specify the reduction ratio (%) used for printing
received documents.
[Print Separate Fax
Pages]
Settings
[ON] /
[OFF]
Select whether or not pages are split when the
received document is longer than the standard paper
size.
When [Duplex Print (RX)] is set to [ON], this parame-
ter does not appear.
[Duplex Print (RX)]
Settings
[ON] /
[OFF]
Select whether or not received documents are printed
on both sides of paper.
When [Print Separate Fax Pages] is set to [ON], this
parameter does not appear.
Item
Description
[F-Code TX]
Settings
[ON]
/ [OFF]
Select whether or not F-code transmissions are used.
[Dest. Check Display
Func.]
Settings
[ON] /
[OFF]
Select whether or not the list of specified destinations
is printed before the fax is sent.
Item
Description