Konica Minolta bizhub C35 bizhub C35 Printer/Copier/Scanner User Guide - Page 311

Clearing Media Misfeeds To avoid damage, always remove misfed media gently, without tearing it. Any piece of media left in the machine, whether large or small, can obstruct the media path and cause further misfeeds. Do not reload media that has misfed. Note The image is not fixed on the media before the fusing process. If you touch the printed surface, the toner may stick to your hands, so be careful not to touch the printed face when removing the misfed media. Make sure not to spill any toner inside the machine. CAUTION Unfused toner can dirty your hands, clothes, or anything else it gets on. If you accidentally get toner on your clothes, lightly dust them off as best as you can. If some toner remains on your clothes, use cool, not hot water, to rinse the toner off. If toner gets on your skin, wash it off with cool water and a mild soap. CAUTION If you get toner in your eyes, wash it out immediately with cool water and consult a doctor. If, after clearing the media misfeed, the misfeed message in the control panel window persists, open and close the engine cover. This should clear the misfeed message. Media misfeed indications If a misfeed occurs during printing, the message "Misfeed detected" appears and the location of the misfeed is indicated in the screen. Media misfeed locations Media misfeed in Tray 2 Media misfeed in Tray 3/Tray 4 Media misfeed in the ADF Media misfeed in the duplex unit Media misfeed in the fuser unit Media misfeed in Tray 1 (manual feed tray) Page reference page 13-7 page 13-11 page 13-13 page 13-15 page 13-16 page 13-20 13-6 Clearing Media Misfeeds