Kyocera ECOSYS P6030cdn ECOSYS P6030cdn Operation Guide (Advanced) - Page 103

Security ID _ Password _ Using the Operation Panel Security The security functions can be set up to protect printer operation and the print data. The options available in Security are as follows: • ID (Administrator ID input) • Password (Administrator Password input) • I/F Block (Interface (external device) block setting) • WSD-PRINT (WSD-PRINT setting) • Enhanced WSD (Enhanced WSD setting) • EnhancedWSD(SSL) (Enhanced WSD (SSL) setting) • IPP (IPP setting) • SSL Server (SSL Server setting) • IPSec (IPSec setting) • LAN Interface (LAN Interface setting) • Security Level (Security Level setting) Note When Command Center RX is used, network parameters and security settings can be conveniently changed and checked from your PC. For more information, refer to the Command Center RX User Guide. 1 Press [MENU]. 2 Press  or  repeatedly until Security > appears. > ID (Administrator ID input) To use the Security function, you must enter an administrator ID. For information on how to set the administrator ID, refer to Administrator (Administrator settings) on page 2-94. 1 Press  while Security > is displayed. 2 The message display shows ID and a blinking cursor (_). 3 Press  or  to increase or decrease, respectively, the value at the blinking cursor. Enter the specified ID. Use  and  to move the cursor right and left. Enter an ID consisting of between 1 and 16 numbers. 4 Press [OK]. Proceed to the next step Password (Administrator Password input). Password (Administrator Password input) To set up the Security functions, you must enter an administrator ID and administrator password. For information on how to set the administrator password, refer to Administrator (Administrator settings) on page 2-94. 1 Once you have entered the correct ID in the previous step (ID (Administrator ID input)), the message display shows Password (Administrator password input) and a blinking cursor (_). 2-79