Kyocera ECOSYS P6030cdn ECOSYS P6030cdn Operation Guide (Advanced) - Page 57
Cassette 1 to 4 Type Setting the cassette paper type
View all Kyocera ECOSYS P6030cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Entering the Width and Length Enter the paper size for X Dimension and Y Dimension as shown in the figure. Y Dimension 148 to 356 mm (5.83 to 14.02 inches) 105 to 216 mm (4.13 to 8.5 inches) X Dimension >>X Dimension 216 mm 1 When the unit of measurement is set, press . >>X Dimension appears (the paper width setting). 2 Press [OK]. A blinking cursor (_) appears. 3 Press or to increase or decrease the value of the figure where the cursor is blinking and display the desired width. Acceptable paper widths are as follows: • Cassette : 105 to 216 mm (4.13 to 8.5 inches) • Paper Feeder PF-500/PF-510 (optional) : 92 to 216 mm (3.62 to 8.5 inches) 4 Display the paper width and press [OK]. 5 When the width is set, press . >>Y Dimension appears (the paper length setting). Set the desired length in the same way as the width. Acceptable paper lengths are as follows: • Cassette : 148 to 356 mm (5.83 to 14.02 inches) • Paper Feeder PF-500/PF-510 (optional) : 162 to 356 mm (6.38 to 14.02 inches) 6 Display the paper length, press [OK]. 7 Press [MENU]. The display returns to Ready. Cassette (1 to 4) Type (Setting the cassette paper type) By setting a paper type (plain, recycled, etc.) for the paper cassette, you can automatically select the paper in the paper cassette according to the paper type you command on the printer driver. The default setting is plain paper for all paper cassettes. If the PF-500 or PF-510 optional paper feeder is installed, use the same procedure to setting the cassette paper type. For more information about paper types that you can feed from the paper cassette, refer to Paper Specifications on page 1-2. 1 Press while Paper Settings > is displayed. 2 Press or repeatedly until >Cassette Type appears. Using the Operation Panel 2-33