Kyocera ECOSYS P6030cdn ECOSYS P6030cdn Operation Guide (Advanced) - Page 118

Administrator ID _ Password _ Administrator (Administrator settings) The Administrator setting is a function that identifies a user who can use the printer and manage other users. When using the Security and Job Accounting functions, the administrator ID and password set here are authenticated, and settings can be specified after they are properly authenticated. The options available in Administrator are as follows: • ID (Administrator ID input) • Password (Administrator Password input) • Change ID (Administrator ID change) • Change Password (Administrator Password change) 1 Press [MENU]. 2 Press  or  repeatedly until Administrator > appears. > ID (Administrator ID input) You can use this to set the administrator ID. Note The default setting is "3000". 1 Press  while Administrator > is displayed. 2 The message display shows ID and a blinking cursor (_). 3 Press  or  to increase or decrease, respectively, the value at the blinking cursor. Enter the specified ID. Use  and  to move the cursor right and left. Enter an ID consisting of between 1 and 16 digits. 4 Press [OK]. Proceed to the next step Password (Administrator Password input). Password (Administrator Password input) You can use this to set the administrator password. Note The default setting is "3000". 1 Once you have entered the correct ID in the previous step (ID (Administrator ID input)), the message display shows Password (Administrator password input) and a blinking cursor (_). 2 Press  or  to increase or decrease, respectively, the value at the blinking cursor. Enter the specified password. Use  and  to move 2-94 Using the Operation Panel