Kyocera ECOSYS P6030cdn ECOSYS P6030cdn Operation Guide (Advanced) - Page 64
Binding Modes
View all Kyocera ECOSYS P6030cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
>Duplex ? Off Binding Modes Binding refers to the manner in which printed pages of paper are joined together (by gluing, stitching, etc.) in book form. The two possible types of binding are: long-edge binding, in which pages are joined together along their long edge; and short-edge binding, in which they are joined together along their short edge. In selecting a binding type, you must also consider the orientation of the printed page. You can use long-edge or short-edge binding with either landscape or portrait printing. Depending on the binding type and print orientation, the duplexer provides four types of binding. These are: (1) portrait, long-edge, (2) portrait, short edge, (3) landscape, long-edge, and (4) landscape, shortedge. The figure below shows these binding methods. (1) Portrait, long-edge (2) Portrait, short-edge (3) Landscape, long-edge Landscape, short-edge (4) 1 Press while Print Settings > is displayed. 2 Press or repeatedly until >Duplex appears. 3 Press [OK]. A blinking question mark (?) appears. 4 Press or to display the desired binding mode. The message display toggles through the following: Off (default) Short edge bind Long edge bind 5 Press [OK]. 6 Press [MENU]. The display returns to Ready. 2-40 Using the Operation Panel