Kyocera ECOSYS P6030cdn ECOSYS P6030cdn Operation Guide (Advanced) - Page 95
Low Power Timer Low Power Mode timer timeout time, Sleep Timer Sleep timer timeout time
View all Kyocera ECOSYS P6030cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
>>Low Power Timer 005 min. >>Sleep Timer 015 min. 3 Press or to increase or decrease the value at the blinking cursor and set the desired time. The time must be set between 005 and 495 seconds, in 5-second increments. Use and to move the cursor right and left. 4 Press [OK]. 5 Press [MENU]. The display returns to Ready. Low Power Timer (Low Power Mode timer timeout time) You can adjust the length of time the printer waits before entering Low Power Mode in the absence of a print job. The printer reverts to normal operation mode when the printer receives a print job or [GO] is pressed on the operation panel. The default time is 1 minute. 1 After entering the administrator ID and password, press or repeatedly until >>Low Power Timer appears. 2 To change the timeout time, press [OK]. A blinking cursor (_) appears. 3 Press or to increase or decrease the value at the blinking cursor and set the desired time. The timer can be set between 1 and 60 min. Use and to move the cursor right and left. 4 Press [OK]. 5 Press [MENU]. The display returns to Ready. Sleep Timer (Sleep timer timeout time) You can adjust the length of time the printer waits before entering Auto Sleep in the absence of data. The printer reverts to normal operation mode when the printer receives a print job or [GO] is pressed on the operation panel. The default time is 15 minutes. Note Color calibration is automatically executed before the printer reverts to normal operation mode. 1 After entering the administrator ID and password, press or repeatedly until >>Sleep Timer appears. 2 To change the timeout time, press [OK]. A blinking cursor (_) appears. 3 Press or to increase or decrease the value at the blinking cursor and set the desired time. The timer can be set between 1 and 60 min (for Europe) or 1 and 240 min (except for Europe). Use and to move the cursor right and left. 4 Press [OK]. 5 Press [MENU]. The display returns to Ready. Using the Operation Panel 2-71