Kyocera ECOSYS P6030cdn ECOSYS P6030cdn Operation Guide (Advanced) - Page 67
Set Setting pagination
View all Kyocera ECOSYS P6030cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
>>Gloss Mode ? Low >>EcoPrint Mode ? Off >Page Set 1 Press while >Print Quality > is displayed. 2 Press or repeatedly until >>Gloss Mode appears. 3 Press [OK]. A blinking question mark (?) appears. 4 Select Low or High using or . 5 Press [OK]. 6 Press [MENU]. The display returns to Ready. EcoPrint Mode (Selecting the EcoPrint mode) By enabling EcoPrint mode, you can minimize the amount of toner used during printing. Because images printed in this mode may be slightly coarser than those printed in standard resolution, you should use EcoPrint for test prints or other situations where high-quality prints are not required. Use the procedure below to select EcoPrint mode. The default setting is Off. 1 Press while >Print Quality > is displayed. 2 Press or repeatedly until >>EcoPrint Mode appears. 3 Press [OK]. A blinking question mark (?) appears. 4 Select On or Off using or . 5 Press [OK]. 6 Press [MENU]. The display returns to Ready. Page Set (Setting pagination) In Page Set menus, you can set the number of copies, page orientation, and other settings regarding pagination. The options available in Page Set are as follows: • Copies (Number of copies) • Orientation (Print orientation) • Wide A4 (Wide A4 pitch) • XPS FitTo Page (Print area setting for XPS data) • TIFF/JPEG Size (Print mode setting for TIFF/JPEG files) 1 Press while Print Settings > is displayed. 2 Press or repeatedly until >Page Set > appears. > Copies (Number of copies) You can set the number of copies of each page to be printed for the current interface. Press while >Page Set > is displayed. Using the Operation Panel 2-43