Kyocera ECOSYS P6030cdn ECOSYS P6030cdn Operation Guide (Advanced) - Page 97
Sleep Level Set. Sleep level setting
View all Kyocera ECOSYS P6030cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
>>Form Feed Time Out 005sec. >Sleep Level Set. > Form Feed Time Out (Automatic form feed timeout setting) If the printer receives no data for a certain period, it will time out and release the current interface. It prints whatever data it has in its buffer and feeds out the page. The default form feed timeout time is 30 seconds. 1 After entering the administrator ID and password, press or repeatedly until >>Form Feed Time Out appears. 2 Press [OK]. A blinking cursor (_) appears. 3 Press or to increase or decrease the value at the blinking cursor and set the desired time. The timeout time can be between 5 and 495 seconds, in 5-second increments. Use and to move the cursor right and left. 4 Press [OK]. 5 Press [MENU]. The display returns to Ready. Sleep Level Set. (Sleep level setting) For Europe This sets whether or not the machine enters sleep mode when connected to a network. • ID (Administrator ID input) • Password (Administrator Password input) • Network (Setting for entering sleep mode when connected to a network) 1 Press while Device Common > is displayed. 2 Press or repeatedly until >Sleep Level Set. > appears. ID (Administrator ID input) To use the Sleep Level settings, you must enter an administrator ID. For information on how to set the administrator ID, refer to Administrator (Administrator settings) on page 2-94. 1 Press while >Sleep Level Set. > is displayed. 2 The message display shows ID and a blinking cursor (_). ID _ 3 Press or to increase or decrease, respectively, the value at the blinking cursor. Enter the specified ID. Use and to move the cursor right and left. Enter an ID consisting of between 1 and 16 numbers. 4 Press [OK]. Proceed to the next step Password (Administrator Password input). Using the Operation Panel 2-73