Kyocera ECOSYS P6030cdn ECOSYS P6030cdn Operation Guide (Advanced) - Page 69
XPS FitTo Print area setting for XPS data, TIFF/JPEG Size Print mode setting for TIFF/JPEG
View all Kyocera ECOSYS P6030cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
>>XPS FitTo Page ? Off >>TIFF/JPEG Size ? Paper Size 6 Press [MENU]. The display returns to Ready. XPS FitTo Page (Print area setting for XPS data) Select On in this setting to enlarge or reduce XPS files to fit the printable area during printing. 1 Press while >Page Set > is displayed. 2 Press or repeatedly until >>XPS FitTo Page appears. 3 Press [OK]. A blinking question mark (?) appears. 4 Select On or Off using or . 5 Press [OK]. 6 Press [MENU]. The display returns to Ready. TIFF/JPEG Size (Print mode setting for TIFF/JPEG files) Use this setting to select the printing method used when TIFF or JPEG files are printed directly. The default setting is Paper Size. 1 Press while >Page Set > is displayed. 2 Press or repeatedly until >>TIFF/JPEG Size appears. 3 Press [OK]. A blinking question mark (?) appears. 4 Press or repeatedly until the desired print mode is displayed. The list shows the following print modes: Paper Size (scaled to fit the paper size) Images are resized so that they fill the paper size when printed. Image Resolution (matched to the image resolution) Image files are printed at the resolution specified in the resolution information. Images with no resolution information are printed using the Paper Size setting. Print Resolution (matched to the print resolution) Images are printed using a 1-to-1 correspondence between the image file pixels and printed dots. For example, the printed size of a 600 × 300-pixel image file is 1 inch × 1/2 inch. 5 Press [OK]. 6 Press [MENU]. The display returns to Ready. Note Images are automatically rotated during printing to provide a closer match between the aspect ratios of the image file and the paper used for printing. Using the Operation Panel 2-45