Kyocera ECOSYS P6030cdn ECOSYS P6030cdn Operation Guide (Advanced) - Page 62
Auto Cass. Change Auto Cassette Change setting, Paper Feed Mode Setting the paper feed source
View all Kyocera ECOSYS P6030cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
>Auto Cass. Change ? On >Paper Feed Mode ? Auto 2-38 Auto Cass. Change (Auto Cassette Change setting) You can select the following actions when the paper runs out in the paper source while printing. By default, this feature is On. Off The printer displays Load Cassette # (# is a cassette number) or Load MP Tray, and stops printing. Load the paper according to the paper source displayed to resume printing. To print from the other paper cassette, press or to display Use alternative?, press or to select the desired paper source, and then press [GO]. On The printer continues printing automatically when the other paper cassette contains the same paper as the currently- used paper cassette. 1 Press while Print Settings > is displayed. 2 Press or repeatedly until >Auto Cass. Change appears. 3 To change the current paper feed source, press [OK]. A blinking question mark (?) appears. 4 Select On or Off using or . 5 Press [OK]. 6 Press [MENU]. The display returns to Ready. Note You can also configure the Auto Cassette Change in the Command Center RX. Access to the Command Center RX, and then go to Basic > Defaults > Device Defaults page. For more information on access to the Command Center RX, refer to the Command Center RX User Guide. Paper Feed Mode (Setting the paper feed source) This mode specifies how the paper should be fed once the paper feed source and paper type have been chosen. If Auto is selected, the printer searches for a paper feed source that matches the paper size and type, and paper is then delivered from that source. If Fixed is selected and there is no matching paper feed source, handling proceeds as specified by Paper Mismatch for Error Handling. For details on paper feeding when Fixed is selected, refer to Paper Mismatch (Detection settings for paper size/type errors when the paper source is fixed) on page 2-68. The default setting is Auto. To change the settings, follow the steps described below. 1 Press while Print Settings > is displayed. 2 Press or repeatedly until >Paper Feed Mode appears. 3 Press [OK]. A blinking question mark (?) appears. 4 Press or until Auto or Fixed appears. 5 Press [OK]. 6 Press [MENU]. The display returns to Ready. Using the Operation Panel