Kyocera ECOSYS P6030cdn ECOSYS P6030cdn Operation Guide (Advanced) - Page 42
Custom Box Using a Custom Box
View all Kyocera ECOSYS P6030cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Custom Box >Select Box ?0001:Box 1 >Select Box ?0001:Box 1 >Select Box 0001:Box 1 Custom Box (Using a Custom Box) IMPORTANT To use a Custom Box, an optional SSD must be installed in the printer. The SSD must be formatted from the printer. For more information, refer to SSD (Using the optional SSD) on page 2-67. A Custom Box is general-purpose box that allows users to store print data on the printer's SSD so that it can be reused as required. Use the Command Center RX to create and delete a Custom Box, but use the printer driver to send data stored in the box. For more information, refer to the Command Center RX User Guide and Printer Driver User Guide. Use the printer's operation panel to print the print data stored in a Custom Box. The options available in Custom Box are as follows: • Select Box (Box number : Box name) (Selecting the Custom Box) • Print Box List (Prints a Custom Box list) 1 Press [MENU]. 2 Press or repeatedly until Custom Box > appears. > Select Box (Box number : Box name) (Selecting the Custom Box) Use this procedure to select the Custom Box containing your document. IMPORTANT The Select Box menu item only appears when there is a Custom Box. 1 Press while Custom Box > is displayed. 2 Press or repeatedly until >Select Box > appears. The box number and box name are displayed. (For example : 0001:Box 1) 3 Press [OK]. A blinking question mark (?) appears before the box number. 4 Press or repeatedly until the desired box number and box name is displayed. Box numbers from 0001 to 1000 are displayed. Press or to scroll and view long box names. 5 Press [OK] to display the desired Custom Box. > Next, refer to Manipulating Data in the Custom Box on page 2-19. IMPORTANT If you have set a password for the Custom Box, carry out the Box Password (Box password input) step next. 2-18 Using the Operation Panel