Kyocera ECOSYS P6030cdn ECOSYS P6030cdn Operation Guide (Advanced) - Page 92
Error Handling Error detection setting
View all Kyocera ECOSYS P6030cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
>Error Handling Error Handling (Error detection setting) This specifies the settings for the detection methods used for duplex printing errors and for paper size and paper type errors when the paper source is fixed. The options available in Error Handling are as follows: • Duplex (Duplex printing error detection setting) • Paper Mismatch (Detection settings for paper size/type errors when the paper source is fixed) • MP Tray Empty (Warning when the MP tray is empty) 1 Press while Device Common > is displayed. 2 Press or repeatedly until >Error Handling > appears. > >>Duplex ? On >>Paper Mismatch ? On 2-68 Duplex (Duplex printing error detection setting) If the error detection setting for duplex printing has been turned On, and you attempt to print onto a paper size and paper type that cannot be used for duplex printing, the Duplex disabled Press GO error message will be displayed and printing will stop. On • To print onto one-side of the paper only when this message is displayed, press [GO]. • Press [Cancel] to cancel the printing itself. Off • To print onto one-side of the paper. 1 Press while >Error Handling > is displayed. 2 Press or repeatedly until >>Duplex appears. 3 Press [OK]. A blinking question mark (?) appears. 4 Select On or Off using or . 5 Press [OK]. 6 Press [MENU]. The display returns to Ready. Paper Mismatch (Detection settings for paper size/type errors when the paper source is fixed) Turn this setting to Off if you want to continue printing even if the paper size or type you specified is different from the fixed paper source, or turn it to On to have the paper feed error displayed. 1 Press while >Error Handling > is displayed. 2 Press or repeatedly until >>Paper Mismatch appears. 3 Press [OK]. A blinking question mark (?) appears. 4 Select On or Off using or . 5 Press [OK]. Using the Operation Panel