Kyocera ECOSYS P6030cdn ECOSYS P6030cdn Operation Guide (Advanced) - Page 94
Password Administrator Password input, Auto Panel Reset Auto panel reset settings, Panel Reset Timer
View all Kyocera ECOSYS P6030cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Password _ >>Auto Panel Reset ? On >>Panel Reset Timer 090sec. 3 Press or to increase or decrease, respectively, the value at the blinking cursor. Enter the specified ID. Use and to move the cursor right and left. Enter an ID consisting of between 1 and 16 numbers. 4 Press [OK]. Proceed to the next step Password (Administrator Password input). Password (Administrator Password input) To set up the Timer settings, you must enter an administrator ID and administrator password. For information on how to set the administrator password, refer to Administrator (Administrator settings) on page 2-94. 1 Once you have entered the correct ID in the previous step (ID (Administrator ID input)), the message display shows Password (Administrator password input) and a blinking cursor (_). 2 Press or to increase or decrease, respectively, the value at the blinking cursor. Enter the specified password. Use and to move the cursor right and left. Enter a password consisting of between 0 (no settings) and 16 numbers. Note If you enter the incorrect administrator ID or password, the message Wrong ID or Wrong Password appears and the input screen then reappears. Re-enter the ID or password correctly. 3 Press [OK]. The Timer settings screen appears. Auto Panel Reset (Auto panel reset settings) The Auto Panel Reset function automatically restores the default settings if the panel is not used for a set time. The default setting is On. For setting the time until the panel is reset, refer to the next section Panel Reset Timer (Setting the panel reset timer). 1 After entering the administrator ID and password, press or repeatedly until >>Auto Panel Reset appears. 2 Press [OK]. A blinking question mark (?) appears. 3 Select On or Off using or . 4 Press [OK]. 5 Press [MENU]. The display returns to Ready. Panel Reset Timer (Setting the panel reset timer) When Auto Panel Reset is set to On, this sets the time until the panel is automatically reset after the user stops using the panel. 1 After entering the administrator ID and password, press or repeatedly until >>Panel Reset Timer appears. 2 Press [OK]. The message display shows a blinking cursor (_). 2-70 Using the Operation Panel