Kyocera KM-3035 KM-NET for Clients Operation Guide Rev-3.7 - Page 61

Operation Guide, Troubleshooting, Symptom, Cause, Remedy, The Read or Write community

Get Kyocera KM-3035 PDF manuals and user guides View all Kyocera KM-3035 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 61 highlights

Troubleshooting Symptom Status remains not connected. The printing system cannot be configured. Cause Remedy The printing system has been Turn the printing system on. turned off. The printing system has been Connect the printing system to the removed from the network. network. The printing system has lost Verify that there is an active network the connection to the network. connection to the printing system. An error condition exists on the printing system. Cancel the error on the printing system. The network address of the printing system has been changed. The network address of a printing system is changed by DHCP, etc. Search for the printing system again. In very rare cases, extremely heavy network traffic may prevent this utility from detecting printing systems. Try again after a brief interval or contact your network administrator. The password is set for the printing system. Enter the password properly. The printing system has been Turn the printing system on. turned off. The printing system has been Connect the printing system to the removed from the network. network. The printing system is printing Try again after processing and or processing data. printing are complete. The printing system is in menu mode. Try again after menu mode is no longer being used. The Read or Write community name does not match the one stored on the network interface. Contact your network administrator. There are some settings that cannot be changed from this utility. They appear grayed out in the menu. Also, when an item is not supported for the selected model then it will be displayed as blank. If the keys and buttons on the operation panel of the printings system are locked, the menu screen can not be displayed when pressing menu button. Unlocked the keys and buttons. Operation Guide 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
Operation Guide
57
Troubleshooting
Status remains not
connected.
The printing system has been
turned off.
Turn the printing system on.
The printing system has been
removed from the network.
Connect the printing system to the
network.
The printing system has lost
the connection to the network.
Verify that there is an active network
connection to the printing system.
An error condition exists on
the printing system.
Cancel the error on the printing
system.
The network address of the
printing system has been
changed.
The network address of a printing
system is changed by DHCP, etc.
Search for the printing system
again.
In very rare cases, extremely
heavy network traffic may
prevent this utility from
detecting printing systems.
Try again after a brief interval or
contact your network administrator.
The printing system
cannot be configured.
The password is set for the
printing system.
Enter the password properly.
The printing system has been
turned off.
Turn the printing system on.
The printing system has been
removed from the network.
Connect the printing system to the
network.
The printing system is printing
or processing data.
Try again after processing and
printing are complete.
The printing system is in
menu mode.
Try again after menu mode is no
longer being used.
The Read or Write community
name does not match the one
stored on the network
interface.
Contact your network administrator.
There are some settings that
cannot be changed from this
utility. They appear grayed out
in the menu.
Also, when an item is not
supported for the selected
model then it will be displayed
as blank.
-
If the keys and buttons on the
operation panel of the
printings system are locked,
the menu screen can not be
displayed when pressing
menu button.
Unlocked the keys and buttons.
Symptom
Cause
Remedy