Kyocera TASKalfa 205c 205c/255c Operation Guide - Page 330
Troubleshooting > Responding to Error Messages - fuser unit
View all Kyocera TASKalfa 205c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 330 highlights
Troubleshooting > Responding to Error Messages E Error Message Checkpoints Error occurred at cassette #. - Corrective Actions Remove the indicated cassette. Press [Next >] to follow the instructions. Reference Page - F Error Message Checkpoints Corrective Actions Failed to specify Job - Accounting.* The job is canceled. Press [End]. Failed to store job retention data. - The job is canceled. Press [End]. Finisher failure. - Contact your Service Representative. Press the System Menu/Counter key, [Adjustment/Maintenance], [Service Setting] and then [Reset Disable Function Mode]. Press [Execute] to perform Reset Disable Function Mode. Finisher tray is full of paper. Is the acceptable storage capacity exceeded for the document finisher tray? Remove paper from the document finisher tray. Fuser unit is not installed. - Replace the fuser unit (h-1) to our specified fuser unit. See the leaflet supplied with the fuser unit for details. * When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. Reference Page - - - - - H Error Message High temperature. Adjust room - temp. Checkpoints Corrective Actions Reference Page Adjust the temperature and the humidity 1-3 of your room. I Error Message Checkpoints Corrective Actions Reference Page Incorrect account ID.* - The Account ID does not match. Check - the registered Account ID. Incorrect Login User Name or - Password.* Enter correct login user name or - password. Inner tray is full of paper. - Remove paper from the inner tray and - press [Continue]. Intermediate transfer unit is not - installed. Replace the intermediate transfer unit - (r) to our specified intermediate transfer unit. See the leaflet supplied with intermediate transfer unit. * When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. 10-16