Kyocera TASKalfa 205c 205c/255c Operation Guide - Page 61
Sleep and Auto Sleep, Auto Sleep, Energy Saver
View all Kyocera TASKalfa 205c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Preparation before Use > Energy Saver function Sleep and Auto Sleep To enter Sleep, press the Power key. Touch panel and all indicators on the operation panel will go out to save a maximum amount of power except the Main Power indicator. This status is referred to as Sleep. If print data is received during Sleep, the touch panel lights up and printing starts. When using the optional fax, received data is printed out while the operation panel remains unlit. To resume, press the Power key. The machine will be ready to use within 23 seconds. Note that ambient environmental conditions, such as ventilation, may cause the machine to respond more slowly. Auto Sleep Auto Sleep automatically switches the machine into Sleep if left idle for a preset time in the Low Power Mode. The default preset time is 30 minutes. For more information about configuring settings, refer to Sleep Timer on page 9-24. Energy Saver This mode reduces power consumption even more than normal Sleep mode, and allows Sleep Mode to be set separately for each function. Printing from a computer connected with a USB cable is not available while the machine is asleep. To use the machine, press the Power key. The time required for the machine to wake up from power save mode and resume normal operation will be longer than for normal Sleep Mode. NOTE If the optional Gigabit Ethernet Board is installed, Energy Saver cannot be specified. For more information on Energy Saver Mode settings, refer to Sleep Level on page 9-24. 2-21