LG LRM-519 User Guide - Page 33
b. Use Phone Line
View all LG LRM-519 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
If You Select "Use Wired (Ethernet) Connection" If your network uses dynamic IP addresses and no Proxy server, select Next. If your network uses a static IP address or a Proxy server, select Configure Network. Select Static IP address, and then use the numeric keypad on the remote to enter the IP address, subnet mask, default gateway address, and DNS address. Notes • Each group of numbers in the addresses must be three digits; add leading zeros (0) as needed. For example, if the fourth section of the subnet mask is "0" enter 000. • To clear an entry, use the arrow keys on the remote to select the incorrect entry, and then enter the correct number. If you use a proxy server, select Configure Proxy Server. Enter the proxy server name by using the remote, and any port if needed. Notes • If the port is less than five digits, add leading zeros (0) as needed. For example, enter port 8085 as 08085. • To clear an entry, use the arrow keys on the remote to select the incorrect entry, and then enter the correct number. 1b. Use Phone Line The Recorder can use a dial-up connection to the Internet to download the Microsoft® Program Guide service and software updates. Important When using a dial-up connection, a software update can take up to 90 minutes to download; Program Guide updates can take up to 20 minutes or longer. For more information, see Downloading the Program Guide and Software Updates. Phone Configuration If your dial-up connection requires pulse dialing (instead of tone dialing) or if you must dial a prefix to get an outside phone line, select Configure phone. If the dial-up connection uses tone dialing and does not use a dialing prefix, select Next. Enter Your Home Phone Number To determine the best phone numbers the Recorder should use to connect to the Microsoft Program Guide service, use the numeric keypad on the remote to enter the area code and prefix (first three digits) of your phone number. Note To clear an entry, use the arrow keys on the remote to select the incorrect entry, and then enter the correct number. 33