LG LRM-519 User Guide - Page 72
Media Connect: Access Pictures - windows media guide
View all LG LRM-519 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Issue Channels do not change with the serial data control cable connected. Solution Restart both the satellite set-top box and the Recorder. If this channels still do not change, use the IR control cable instead. Notes: • Some satellite set-top boxes support the use of the serial data control cable to change channels and the IR control cable. However, not all of theses specific satellite set-top boxes enable the serial input port. For more information, check with the set-top box manufacturer. • Before you connect the serial data control cable, make sure the power cord for the Recorder and the power cord for the satellite setBefore you connect the serial data control cable, make sure the power cord for the Recorder and the power cord for the satellite settop box are not plugged into a power outlet or power strip. • The Recorder supports serial data control by using the Serial-APG and Serial-MPG serial data control protocols. Check with the set-top box manufacturer or satellite service provider to make sure your satellite set-top box uses this standard. For more information, see The IR control cable and the Serial Data Control Cable. The message " cannot be recorded because there are too many recorded shows" appears. The Recorder disk drive contains too many recorded TV shows and there is not enough disk space to record the current show. Go to Recorded TV and delete some recorded shows, or add a USB device for additional storage. For information about adding a USB device, see Add Additional Storage. Pictures and Music from other computers are not available. To display pictures and play music stored on a computer, the computer and the Recorder must be connected to the same network and the computer must be running Window Media Connect. If these two conditions are met, check the following: • Make sure both the computer and the Recorder have network access. For example, try downloading the Guide listings on the Recorder and open a browser window on the computer. • The computer must be turned on. • Open Windows® Media Connect and make sure the Recorder is listed as a recognized device. For more information, see Windows® Media Connect: Access Pictures and Music Stored on a Computer. Cannot record a DVD from a DVD player to the Recorder. You cannot connect a DVD player and then copy a DVD to the Recorder. For more information, see Copying of Commercial/Retail Copyrighted DVDs. The Recorder plays a sample video repeatedly. 72 The Recorder may be in Demonstration mode. To end Demonstration mode, unplug the power cord from the back of the Recorder, wait five seconds, and then re-attach the power cord to the Recorder while press OPEN/CLOSE on the front panel.