LG LRM-519 User Guide - Page 71
Guide Settings > Setup TV Signal and Guide
View all LG LRM-519 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Issue Cannot change channels or the cable set-top box or satellite set-top box changes to the wrong channel. Solution The IR control cable may not be properly positioned or the IR settings for the remote may be incorrect. Make sure: • The cable set-top box or satellite set-top box is turned on. The set-top box must be left on at all times. If not, the Recorder cannot change channels and cannot record TV shows you schedule. • The IR control cable is properly positioned in front of the IR receiver on the digital cable or satellite set-top box. If you are not sure, check the documentation for you digital cable or satellite service. For more information, see The IR control cable and the Serial Data Control Cable. • The IR control cable is connected to the IR port on the back of the Recorder. • The IR settings for the cable set-top box or satellite set-top box are correct. These settings include the remote control code for the cable set-top box or the satellite set-top box and the speed of the remote control signal. If the remote control code is incorrect, incorrect codes may be sent to change the channels. If the speed for sending codes to the set-top box is incorrect, the set-top box may try to change channels incorrectly. Or, the Recorder may need to send an ENTER or OK code to set-top box after you enter a channel change. To change these settings, run Setup again. On the Start menu, select Settings > Guide Settings > Setup TV Signal and Guide. For additional information about the cable set-top box or satellite set-top box, contact the manufacturer or the TV service provider. • Some cable set-top boxes and satellite set-top boxes require you to press the OK or ENTER button on the remote control when you enter a channel you want to change to. Make sure you have correctly selected this option when you setup the Recorder. For more information, see section 5. Wiring Setup and TV Service Provider in Setup the Recorder. 71