LG LWC3063ST Owners Manual - Page 55
Changing the Oven Light, Cleaning the Exterior
View all LG LWC3063ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
ENGLISH Changing the Oven Light The oven light is a standard 50-watt appliance bulb. It turns on when the oven door is open. When the oven door is closed, touch Light to turn it on or off. Replacing Lamp on Side Wall 1 Unplug oven or disconnect power. 2 Remove oven racks. 3 Slide a flat blade screwdriver between the housing and the glass light cover. 4 Support the glass light cover with two fingers to prevent the cover from falling to the bottom of the oven. Glass Light Cover Flat blade screwdriver 5 Gently twist the screwdriver blade to loosen the glass light cover. Housing MAINTENANCE 55 Cleaning the Exterior Painted and Decorative Trim For general cleaning, use a cloth with hot soapy water. For more difficult soils and built-up grease, apply a liquid detergent directly onto the soil. Leave it on for 30 to 60 minutes. Rinse with a damp cloth and dry. Do not use abrasive cleaners. Stainless Steel Surfaces To avoid scratches, do not use steel wool pads. 1 Place a small amount of stainless steel appliance cleaner or polish on a damp cloth or paper towel. 2 Clean a small area, rubbing with the grain of the stainless steel if applicable. 3 Dry and buff with a clean, dry paper towel or soft cloth. 4 Repeat as necessary. NOTE •• Do not use a steel wool pad. it will scratch the surface. •• To clean the stainless steel surface, use warm sudsy water or a stainless steel cleaner or polish. •• Always wipe in the direction of the metal surface finish. •• To purchase stainless steel appliance cleaner or polish, or to locate a dealer near you, call our toll-free customer service number: 1-800-243-0000 (USA), or visit our website at: www.lg.com 6 Remove bulb from socket. 7 Replace bulb, replace light cover by snapping back into place. 8 Plug in oven or reconnect power. Warning •• Make sure that the oven and bulb are cool. •• Disconnect the electrical power to the oven at the main fuse or circuit breaker panel. Failure to do so can result in severe personal injury, death, or electrical shock. •• Wear gloves while changing the oven light. Glass fragments from broken bulbs can cause risk of injury.