Lenovo 0768AFU User Manual - Page 49

Restoring, serial, number, system, Retaining, Reading, writing, information

Page 49 highlights

FRU replacement notices v "Retaining the UUID" v "Reading or writing the ECA information" Restoring the serial number of the system unit When the computer was manufactured, the EEPROM on the system board was loaded with the serial numbers of the system and all major components. These numbers need to remain the same throughout the life of the computer. If you replace the system board, you must restore the serial number of the system unit to its original value. Before replacing the system board, save the original serial number by doing the following: 1. Install the CE Utility Diskette for Lenovo 3000 notebooks, and restart the computer. 2. From the main menu, select 1. Set System Identification. 3. Select 2. Read S/N data from EEPROM. The serial number of each device in your computer is displayed; the serial number of the system unit is listed as follows: v 20: Serial number Write down that number. Note: The serial number of the system unit is also written on the label attached to the bottom of the computer. After you have replaced the system board, restore the serial number by doing the following: 1. Install the CE Utility Diskette for Lenovo 3000 notebooks and restart the computer. 2. From the main menu, select 1. Set System Identification. 3. Select 1. Add S/N data from EEPROM. Follow the instructions on the screen. Retaining the UUID The Universally Unique Identifier (UUID) is a 128-bit number uniquely assigned to your computer at production and stored in the EEPROM of your system board. The algorithm that generates the number is designed to provide unique IDs until the year A.D. 3400. No two computers in the world have the same number. When you replace the system board, you must set the UUID on the new system board as follows: 1. Install the CE Utility Diskette for Lenovo 3000 notebooks, and restart the computer. 2. From the main menu, select 4. Assign UUID. A new UUID is created and written. If a valid UUID already exists, it is not overwritten. Reading or writing the ECA information Information on Engineering Change Announcements (ECA) are stored in the EEPROM of the system board. The electronic storage of this information simplifies the procedure to check if the ECA has been previously applied to a machine. The machine does not need to be disassembled to check for the ECA application. Lenovo 3000 N100 and N200 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165

v
“Retaining
the
UUID”
v
“Reading
or
writing
the
ECA
information”
Restoring
the
serial
number
of
the
system
unit
When
the
computer
was
manufactured,
the
EEPROM
on
the
system
board
was
loaded
with
the
serial
numbers
of
the
system
and
all
major
components.
These
numbers
need
to
remain
the
same
throughout
the
life
of
the
computer.
If
you
replace
the
system
board,
you
must
restore
the
serial
number
of
the
system
unit
to
its
original
value.
Before
replacing
the
system
board,
save
the
original
serial
number
by
doing
the
following:
1.
Install
the
CE
Utility
Diskette
for
Lenovo
3000
notebooks,
and
restart
the
computer.
2.
From
the
main
menu,
select
1.
Set
System
Identification
.
3.
Select
2.
Read
S/N
data
from
EEPROM
.
The
serial
number
of
each
device
in
your
computer
is
displayed;
the
serial
number
of
the
system
unit
is
listed
as
follows:
v
20:
Serial
number
Write
down
that
number.
Note:
The
serial
number
of
the
system
unit
is
also
written
on
the
label
attached
to
the
bottom
of
the
computer.
After
you
have
replaced
the
system
board,
restore
the
serial
number
by
doing
the
following:
1.
Install
the
CE
Utility
Diskette
for
Lenovo
3000
notebooks
and
restart
the
computer.
2.
From
the
main
menu,
select
1.
Set
System
Identification
.
3.
Select
1.
Add
S/N
data
from
EEPROM
.
Follow
the
instructions
on
the
screen.
Retaining
the
UUID
The
Universally
Unique
Identifier
(UUID)
is
a
128-bit
number
uniquely
assigned
to
your
computer
at
production
and
stored
in
the
EEPROM
of
your
system
board.
The
algorithm
that
generates
the
number
is
designed
to
provide
unique
IDs
until
the
year
A.D.
3400.
No
two
computers
in
the
world
have
the
same
number.
When
you
replace
the
system
board,
you
must
set
the
UUID
on
the
new
system
board
as
follows:
1.
Install
the
CE
Utility
Diskette
for
Lenovo
3000
notebooks,
and
restart
the
computer.
2.
From
the
main
menu,
select
4.
Assign
UUID
.
A
new
UUID
is
created
and
written.
If
a
valid
UUID
already
exists,
it
is
not
overwritten.
Reading
or
writing
the
ECA
information
Information
on
Engineering
Change
Announcements
(ECA)
are
stored
in
the
EEPROM
of
the
system
board.
The
electronic
storage
of
this
information
simplifies
the
procedure
to
check
if
the
ECA
has
been
previously
applied
to
a
machine.
The
machine
does
not
need
to
be
disassembled
to
check
for
the
ECA
application.
FRU
replacement
notices
Lenovo
3000
N100
and
N200
43