Lenovo ThinkPad 380ED TP 380Z Hardware Maintenance Manual (August 1998) for us - Page 11
Checkout Guide, Power failure.
View all Lenovo ThinkPad 380ED manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Checkout Guide Use the following procedure as a guide for computer problems. Note: The diagnostic tests are intended to test only IBM products. Non-IBM products, prototype cards, or modified options can give false errors and invalid system responses. 1. Obtain the symptoms in detail. 2. Verify the symptoms by running the diagnostic test to re-create the same error or by repeating the same operation. Note: To run the diagnostic test, refer to "Running the Diagnostics" on page 34. If the symptoms occur at irregular intervals and cannot be re-created (and therefore cannot be verified), go to "Symptom-to-FRU Index" on page 23; then go to "Intermittent Problems" on page 32. 3. Match the verified symptoms with the following table and determine the page to go to. Verified Symptoms Power failure. (The power indicator does not go on or stay on.) POST does not complete. No beeps or error codes are displayed. The configuration is not the same as the installed devices. POST beeps, but no error codes are displayed. POST detected an error and displayed numeric error codes. The diagnostic test detected an error and displayed a FRU code. Go To "Power Systems Checkout" on page 13. "Symptom-to-FRU Index" on page 23, and then go to "No Beep Symptoms" on page 28. "Checking the Installed Devices List" on page 35. "Symptom-to-FRU Index" on page 23, and then go to "Beep Symptoms" on page 28. "Symptom-to-FRU Index" on page 23, and then go to "Numeric Error Codes" on page 23. "FRU Codes" on page 38. ThinkPad 380Z 9