Lenovo ThinkPad 380ED TP 380Z Hardware Maintenance Manual (August 1998) for us - Page 27
Go to Battery Checkout, Device Checkout
View all Lenovo ThinkPad 380ED manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Symptom / Error 185 (The start-up sequence is not valid. Probably the computer was powered off when the start-up sequence was being updated.) 186 190 (A depleted battery pack was installed when the power was on.) 191XX (PM initialization error.) 192 (Fan error) 195 (The configuration read from the hibernation data storage area does not match the actual configuration.) 196 (A read error occurred in the hibernation area of the hard disk drive.) 199XX (Resume error.) 1XX 225 (Unsupported memory module) 2XX 201: Memory data error. 202: Memory line error 00-15. 203: Memory line error 16-23. 205: Memory test failure on on-board memory. 221: ROM to RAM remap error. 301, 303, 304, 305, 3XX (301: Keyboard error.) FRU / Action in Sequence Reset the start-up sequence in Easy-Setup. System Board Go to "Battery Checkout" on page 14. System board 1. Fan 2. System board Check if the configuration was changed. For example, check if the DIMM is added. 1. Run the hard disk drive test. 2. Hard disk drive System board System board 1. Check if a supported DIMM is installed. 2. DIMM Card 3. System board 1. Go to "Memory Checkout" on page 12. 2. DIMM 3. System board 1. Go to "Keyboard or Auxiliary Input Device Checkout" on page 11. 2. Keyboard 3. External numeric keypad 4. External keyboard 5. Keyboard/mouse cable 6. DC/DC card 7. System board ThinkPad 380Z 25