Lenovo ThinkPad X60s (English) Service and Troubleshooting Guide - Page 40

computer

Get Lenovo ThinkPad X60s PDF manuals and user guides View all Lenovo ThinkPad X60s manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

Replacing memory (DRAM) unbuffered small outline dual inline memory module (SO-DIMM), available as an option, in the memory slot of your computer. SO-DIMMs with different capacities are available. Note: Use only the memory types supported by your computer. If you incorrectly install the optional memory or install an unsupported memory type, a warning beep will sound when you try to start the computer. To install an SO-DIMM, do the following: 1. Touch a metal table or a grounded metal object. This action reduces any static electricity in your body, that could damage the SO-DIMM. Do not touch the contact edge of the SO-DIMM. 2. Turn off the computer; then disconnect the ac adapter and all cables from the computer. 3. Close the computer display, and turn the computer over. 4. Remove the battery. 5. Loosen the screws that hold the memory-slot cover in place 1 ; then remove the cover 2 . 6. If two SO-DIMMs are already installed in the memory slot, remove one of them to make room for the new one by pressing out on the latches on both edges of the socket at the same time. Be sure to save it for future use. 32 ThinkPad® X60 Service and Troubleshooting Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
(DRAM)
unbuffered
small
outline
dual
inline
memory
module
(SO-DIMM),
available
as
an
option,
in
the
memory
slot
of
your
computer.
SO-DIMMs
with
different
capacities
are
available.
Note:
Use
only
the
memory
types
supported
by
your
computer.
If
you
incorrectly
install
the
optional
memory
or
install
an
unsupported
memory
type,
a
warning
beep
will
sound
when
you
try
to
start
the
computer.
To
install
an
SO-DIMM,
do
the
following:
1.
Touch
a
metal
table
or
a
grounded
metal
object.
This
action
reduces
any
static
electricity
in
your
body,
that
could
damage
the
SO-DIMM.
Do
not
touch
the
contact
edge
of
the
SO-DIMM.
2.
Turn
off
the
computer
;
then
disconnect
the
ac
adapter
and
all
cables
from
the
computer.
3.
Close
the
computer
display,
and
turn
the
computer
over.
4.
Remove
the
battery.
5.
Loosen
the
screws
that
hold
the
memory-slot
cover
in
place
±1²
;
then
remove
the
cover
±2²
.
6.
If
two
SO-DIMMs
are
already
installed
in
the
memory
slot,
remove
one
of
them
to
make
room
for
the
new
one
by
pressing
out
on
the
latches
on
both
edges
of
the
socket
at
the
same
time.
Be
sure
to
save
it
for
future
use.
Replacing
memory
32
ThinkPad
®
X60
Service
and
Troubleshooting
Guide