Lexmark 25C0010 User's Guide - Page 85

Menu item RX Settings RX Mode Fax Only Manual FAX/TAD Auto Reduction Off On Ring Count Delay xx times F/T Ring Time xx sec Tray Settings Tray Use: Fax Auto Tray 1 Only Tray 2 Only Delete Document Memory Job Clear Clear Not Clear All Clear Clear Not Clear Description Sets the incoming fax transmission settings Notes: • FAX/TAD is the factory default setting for RX Mode. • 4 times is the factory default setting for Ring Count Delay. • 15 sec is the factory default setting for F/T Ring Time. • Off is the factory default setting for Auto Reduction. • Use Auto Reduction to enable or disable automatic reduction of faxes to fit the paper loaded in the paper tray. • Set the Ring Count Delay to the number of rings before a fax call is answered. Settings for the ring count range from 1-99. • Set the F/T Ring Time to change the length of time (in seconds) the machine rings before switching to a fax receive mode. The ring time settings range from 5-99 seconds. Sets the default tray to use for incoming faxes Note: Auto is the factory default setting. Specifies which documents to clear from memory Notes: • Use Memory Job Clear to select an individual job to clear. • Use All Clear to clear all jobs from memory. 85