Lexmark 4049LMO Service Manual - Page 115
Transfer Roll Removal, Repair Information 4-36
View all Lexmark 4049LMO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
4049-XXX Transfer Roll Removal 1. Unplug the power cord. 2. Remove the print cartridge. 3. Remove the bearing cover from the left side of the transfer roll: Note: Do not touch the transfer roll surface. • Support the left bearing cover from the front with your left hand. • Use a small screwdriver to push the rear latch forward and release the bearing cover. This exposes the bearing on the end of the transfer roll. 4. Grasp the bearing on the end of the transfer roll. Lift slightly and move it to the left until the right end of the transfer roll shaft slides out of the right side bearing. 5. Remove the transfer roll. 6. Lift the right bearing straight up and out of the machine. Repair Information 4-36
Repair Information 4-36
4049-XXX
Transfer Roll Removal
1.
Unplug the power cord.
2.
Remove the print cartridge.
3.
Remove the bearing cover from the left side of the transfer roll:
Note:
Do not touch the transfer roll surface.
•
Support the left bearing cover from the front with your left
hand.
•
Use a small screwdriver to push the rear latch forward and
release the bearing cover. This exposes the bearing on the
end of the transfer roll.
4.
Grasp the bearing on the end of the transfer roll. Lift slightly and
move it to the left until the right end of the transfer roll shaft
slides out of the right side bearing.
5.
Remove the transfer roll.
6.
Lift the right bearing straight up and out of the machine.