Lexmark 4049LMO Service Manual - Page 87

Paper Feed Magnet Adjustment, Rotate the magnet against the feeler gauge.

Get Lexmark 4049LMO - Optra Lx+ B/W Laser Printer PDF manuals and user guides View all Lexmark 4049LMO manuals
Add to My Manuals
Save this manual to your list of manuals

Page 87 highlights

4049-XXX Paper Feed Magnet Adjustment 1. Remove the system board. The magnet is accessed through the holes in the right frame. 2. With the armature latched on the cam step check for 0.60 mm ± 0.07 mm (0.024 in. ± 0.003 in.) between the foam pad and the magnet pole piece. If adjustment is required, continue. 3. Keep the armature latched and loosen the magnet mounting screw [A]. 4. Insert the feeler gauge. 5. Rotate the magnet against the feeler gauge. 6. Tighten the mounting screw. 7. The gauge should pass between the foam pad and the magnet pole piece with moderate resistance. Repair Information 4-8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
Repair Information 4-8
4049-XXX
Paper Feed Magnet Adjustment
1.
Remove the system board. The magnet is accessed through the
holes in the right frame.
2.
With the armature latched on the cam step check for 0.60 mm ±
0.07 mm (0.024 in. ± 0.003 in.) between the foam pad and the
magnet pole piece. If adjustment is required, continue.
3.
Keep the armature latched and loosen the magnet mounting
screw [
A
].
4.
Insert the feeler gauge.
5.
Rotate the magnet against the feeler gauge.
6.
Tighten the mounting screw.
7.
The gauge should pass between the foam pad and the magnet
pole piece with moderate resistance.