Lexmark 4049LMO Service Manual - Page 60
Skew, all edges, top and bottom only
View all Lexmark 4049LMO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
4049-XXX Inspect and clean the inside of the printer carefully and correct any problems found. Skew, all edges If the test print frame is parallel to all edges of the page but the margins are not all the same width. "Print Registration" on page 3-12. If the test print frame is not parallel to the left and right edges of the paper, the paper has skewed in the paper path. Check the paper path for obstructions. Make sure the paper in the tray is undamaged and loaded properly, and the tray side restraint is properly adjusted. Check the prealigner, drive, and auxiliary rollers, springs, and backup rollers for dirt, wear, or damage; refer to the parts catalog for repair kits for broken bellcrank spring attachment hooks on the sideframe. Make sure all the bellcrank assemblies pivot freely. Check the gear train for damage or binds. Skew, top and bottom only If the test print frame is parallel to the left and right edges of the paper but not parallel to the top and bottom, the printhead skew needs to be adjusted. See "Printhead Skew Adjustment" on page 4-9. 2-33